Install the ductwork, Install discharge collar – Best PK22 User Manual

Page 5

- 5 -

INSTALL THE DUCTWORK

NOTE: To reduce the risk of fire, use only metal

ductwork.

1. Decide where the ductwork will run between

the hood and the outside.

2. A straight, short duct run will allow the hood

to perform most efficiently.

3. Long duct runs, elbows, and transitions will

reduce the performance of the hood. Use
as few of them as possible.

4. Use duct tape to seal the joints between

ductwork sections.

5. Install a roof or wall cap. Connect 8" round

metal ductwork to cap and work back towards
hood location.

ROOF CAP

8” ROUND DUCT

WALL

CAP

HOOD

24” TO 30” ABOVE

COOKING SURFACE

8” ROUND

ELBOW

INSTALL DISCHARGE
COLLAR

1. Attach the discharge collar onto the hood; it

must be attached by means of 4 mounting
screws (3,9x9,5 mm Pan Head).

2. Remove the tape located on the damper.

MOUNTING SCREWS

(3.9x9.5mm)

REMOVE THE

TAPE