Watts WP2-BVC User Manual
Microbiological drinking water purifier, Model wp2-bvc
![background image](/manuals/589768/1/background.png)
Microbiological Drinking Water Purifier
Model WP2-BVC
Removes
99.999999% Bacteria
99.9999% Virus
99.99% Protozoan Cyst
Reduces chlorine, tastes and odors
NSF certified and independent lab tested.
Model WP2-BVC includes the complete system
for under counter installation, including designer,
top mount faucet for safe drinking water.
Provides multi-stage treatment for safe drinking water:
#1
Five micron cartridge to reduce sediment, dirt, rust
particles, silt and suspended matter.
#2
Enhanced carbon block to reduce chlorine, taste
and odors with patented, bacteriostatic fail-safe
chemistry, to reduce bacteria, virus and cysts,
without the use of membrane technology.
Bacteria
99.9999%
Virus
99.99%
Cysts
99.95%
Cryptosporidium
99.95%
Entamoeba
99.95%
Giardia
99.95%
Toxoplasma
99.95%
System tested and certified by NSF
International against NSF/ANSI
Standard 42. Please refer to PDS
for specific performance claims.
The WATTS microbiological drinking water purifier
offers multi-stage filtration to provide safe, great
tasting drinking water for you and your family. The
system is an excellent alternative to reverse
osmosis technology because the unit is easy to
install, easy to service and highly affordable.
Salmonella
E-Coli
Cholera
Hepatitis A
Norwalk
Toxoplasma
Removes:
Certified For:
% Reduction
Virus (enteric)
Legionella
Giardia
Cryptosporium
Entamoeba
And more!
System has been tested by BioVir as a
Microbiological Water Purifier based on
the recommendations set forth in the
USEPA Guide Standard and Protocol for
Microbiological Water Purifiers (OPP
Task Force Report 1987)
System has been independently tested for the disinfection of microbiologically contaminated water. The system is not intended for the treatment of water that has an obvious
contamin ation source, such as raw sewage. This system is not intended to convert wastewater to microbiologically safe drinking water.
The patented final stage microbiological filter provides a physical
barrier to prevent bacteria, virus, and cysts from flowing through the
filter in the presence of microbiological contamination. In addition,
proprietary ingredients are added to the carbon block to increase
removal efficiencies and provide additional protection from harmful
water contaminants.
Operating Temperature
Operating Pressure
Max. 100°F (38°C)
Max. 100 PSI (7 bar)
Min. 40°F (4.4°C)
Min. 20 PSI (1.4 bar)
Florida
800-461-4406
Texas
800-659-8400
Arizona
623-505-1550
Distributed by: