Metrohm 867 pH Module - Manual (Page 10)

1.2 Instrument description
￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
2 ￭￭￭￭￭￭￭￭
867 pH Module
1.2 Instrument description
The 867 pH Module has the following characteristics:
￭ Operation
A touch-screen Touch Control or a high-performance PC software is
used for operation.
￭ Dosing
Dosinos and Dosimats can be used for dosing. Dosing is required for
standard additions and when auxiliary solutions are to be dosed.
￭ MSB connectors
Four MSB connectors (Metrohm Serial Bus) for connecting dosing devi-
ces (Dosimat with exchange unit or Dosino with dosing unit), stirrers
and Remote Boxes.
￭ USB connectors
Two USB connectors, with which devices such as printers, PC key-
boards, barcode readers or additional control instruments (USB Sample
Processor, Titrando, Dosing Interface, etc.) can be connected.
￭ Measuring interface
One measuring input each for:
– a potentiometric electrode (pH, metal or ion-selective electrode)
– a separate reference electrode
– a temperature sensor (Pt1000 or NTC)
– a polarizable electrode
– an iConnect (measuring interface for electrodes with integrated
data chip, so-called iTrodes)
1.3 Measuring modes and commands
The following measuring modes and commands are supported:
￭ MEAS
The following measuring modes can be selected for measurements:
– pH (pH measurement)
– U (potentiometric voltage measurement)
– T (temperature measurement)
– Ipol (voltametric measurement with selectable polarization cur-
rent)
– Upol (amperometric measurement with selectable polarization
voltage)
– Conc (concentration measurement)