beautypg.com

Setting send mode – Buffalo Technology WLA-L11 User Manual

Page 38

background image

WLA-L11 User’s Manual

36

Set the AirStation’s LAN board send mode using the following procedure.

Follow the screen instructions to complete the settings.

Setting Send Mode

1

Refer to the "Displaying AirStation Setting Screen" section (page 29) in Chapter
2, What is Next?, and display the AirStation setting screen.

2

Click the Custom Setup button.

3

In the "Communication Type" field, select
either full duplex or half duplex, and click the
Set button.

When the AirStation’s send mode is set to full duplex, make sure that the send

mode for the connected hub is also set to full duplex. When the send mode for the con-
nected hub is set to Auto Negotiation and half duplex, and the AirStation’s send mode is
set to full duplex, communications will be disabled.

See also other documents in the category Buffalo Technology Hardware: