Metrohm 893 Professional Biodiesel Rancimat - Manual (Page 20)

3.2 Mounting accessories
￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
12 ￭￭￭￭￭￭￭￭
893 Professional Biodiesel Rancimat
NOTE
The dust filter serves for filtering the air aspirated through the air
pump and must be replaced at periodic intervals (see Chapter 5.2,
page 36).
2 Mounting the drying flask
Figure 5 Drying flask - Individual parts
1 Drying flask cap (6.1602.145) 2 Filter tube (6.1821.040)
3 Bottle (6.1608.050)
￭ Fill the molecular sieve into the drying flask.
￭ Screw the filter tube on the bottom side of the drying flask cap
into the opening marked with a dot (on the upper side).
￭ Screw the drying flask cap with mounted filter tube onto the dry-
ing flask and insert it in the flask holder on the rear of the 893
Professional Biodiesel Rancimat.
￭ Screw one end of the FEP tubing 250 mm to the opening on the
drying flask cap marked with a dot.
￭ Screw the other end of the FEP tubing to the From flask connec-
tor on the rear of the 893 Professional Biodiesel Rancimat.
￭ Screw one end of the second FEP tubing 250 mm to the second
opening on the drying flask cap.
￭ Screw the other end of the second FEP tubing to the To flask
connector.