Metrohm NIRS XDS SmartProbe Analyzer - Manual (Page 23)

▪▪▪▪▪▪▪ 21
Direct Connection Solution 2: Power down the XDS Instrument, then power it back up. Wait
120 seconds, for the instrument to determine the correct method
of Ethernet communication. Please do not click anything for this
amount of time, or communication may be interrupted.
Direct Connection Solution 3:
Click on “Try Direct Connect
with Default IP”. This searches
for the default IP address stored
in the instrument.
When the instrument is found,
click “OK”
This should resolve the connection issue. Proceed to “Acquire” and “Connect” in Vision.