Metrohm 802 Rod Stirrer - Manual (Page 9)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
1 Introduction
￭￭￭￭￭￭￭￭ 1
1 Introduction
1.1 Instrument description
The propeller rod stirrer 802 Stirrer is controlled by a Touch Control or a
PC software.
It however has its own control. The stirring rate is set by a controller.
The 802 Stirrer can be connected to a titration stand, a tower of a sample
changer or directly to a sample changer.
1.2 About the documentation
CAUTION
Please read through this documentation carefully before putting the
instrument into operation. The documentation contains information
and warnings which the user must follow in order to ensure safe opera-
tion of the instrument.
1.2.1 Symbols and conventions
The following symbols and styles are used in this documentation:
Cross-reference to figure legend
The first number refers to the figure number, the
second to the instrument part in the figure.
Instruction step
Carry out these steps in the sequence shown.
Warning
This symbol draws attention to a possible life hazard
or risk of injury.
Warning
This symbol draws attention to a possible hazard due
to electrical current.
Warning
This symbol draws attention to a possible hazard due
to heat or hot instrument parts.