Vizio E600i-B3 - User Manual User Manual

Page 67

The buttons on the remote aren’t working.

• The Red and Yellow hot key buttons below the V button

do not operate with this model.

• Ensure you are only pressing one button at a time.
• Point the remote directly at the TV when pressing a

button.

• Replace the remote batteries with new ones. See

The image quality is not good.

• For the best image quality, view high-definition

programs using digital sources. Connect your devices

with HDMI cables.

• If you are using an antenna, the signal strength of the

channel may be low. Ensure your antenna is connected

securely to the TV and move the antenna around the

room or close to a window for the best signal.

The picture is distorted.

• Nearby electrical devices may be interfering with the

TV. Separate the TV from electrical appliances, cars, or

fluorescent lights.

• Ensure all cables are securely attached.

The display image does not cover the entire screen.

• If you are using TV, AV, or Component with 480i input,

press the WIDE button on the remote to change the

screen mode.

The TV has pixels (dots) that are always dark or always lit.

• Your HDTV is precision-manufactured using an extremely

high level of technology. However, sometimes pixels may

not display correctly. These types of occurrences are

inherent to this type of product and do not constitute a

defective product.

I see “noise” or static on the screen.

• When your TV’s digital capabilities exceed a

digital broadcast signal, the signal is up-converted

(improved) to match your TV’s display capabilities. This

up-converting can sometimes cause irregularities in the

image.

• If you are using an antenna, the signal strength of the

channel may be low. Ensure your antenna is connected

securely to the TV and move the antenna around the

room or close to a window for the best signal.

When I change input source, the display image changes size.

• The TV remembers the viewing mode on each input

source. If the viewing mode on the new input source

differs from the one on the input source you switch from,

the difference may be noticeable.

• See