Completing the first-time setup – Vizio E600i-B3 - User Manual User Manual

Page 25

Completing the First-Time Setup

8. Use the Arrow buttons on the

remote to highlight your TV

source and press OK.

If you have cable TV, select

whether you have a cable box

or if you connect the TV directly

to a cable from the wall.

9. If the TV Signal channel scan

screen appears, the TV will

need to scan for channels,

which takes several minutes.

Use the arrow buttons on the

remote to highlight Begin Scan

and press OK.

Otherwise, use the Arrow and

OK buttons on the remote to

select the input your TV source

is connected to.

(Number of inputs may vary

depending on your TV)

10. When you are finished, the message “Your VIZIO TV is set up”

will appear.

The First-Time Setup is complete.