Getting started – Dulce Systems PRO IDC with g2 trays User Manual
Page 5
Page 8
PRO IDC Installation and User’s Manual
1.2.
System Requirements
• Windows XP / Vista / Server
• Mac OS X 10.4 or higher.
• Linux / Unix.
• Apple Power Mac G5, Mac Pro
• 2 or 4Gb Fibre Channel Port with optical LC connection.
1.3.
Technical Support
Phone
FAX
Web
If the product requires service, please contact Dulce Systems’ Technical Support
and obtain an RMA number. Ship the product properly packaged to:
9620
Chatsworth, CA 91311
PRO IDC Installation and User’s Manual
System Requirements
Server / 32 & 64-bit.
Mac OS X 10.4 or higher.
Mac Pro, Windows compatible PC.
2 or 4Gb Fibre Channel Port with optical LC connection.
Technical Support
818-435-6007
818-576-0324
www.dulcesystems.com
If the product requires service, please contact Dulce Systems’ Technical Support
and obtain an RMA number. Ship the product properly packaged to:
Dulce Systems
Attn: RMA
620 Topanga Canyon Place,
Suite E
Chatsworth, CA 91311
If the product requires service, please contact Dulce Systems’ Technical Support
Page 9
PRO IDC Installation and User’s Manual
2. Getting Started
The PRO IDC comes pre-assembled and almost ready for use, just install the
Disk Modules, attach the Fibre Channels to the computer or the switch, and
install the JAVA RAID Manager. If you are using a Mac, you are good to go, by
default the unit is pre-formatted for Mac OS X operation. For Windows, a small
format procedure is needed.
2.1.
Packaging
Please do not discard the boxes and packing materials in case you
might need to reuse them later. Always ship the product in its original
packaging. Improperly packaged products will be subjected to shipping
damage, for which you will be liable for the repair.
2.2.
Check List
• Installation and User’s Manual.
• Power Cords (North America user only).
• 3u 19” rackmount 16 disk bay system enclosure.
• 16 Disk Modules.
• One Ethernet Cable.
• 2 One 3-meter LC to LC optical Fibre Channel cable.
• 2 SFP Optical Transceiver.
• Rackmount rails (optional)