Dulce Systems PRO RX - Manual (Page 48)

Page 10
PRO RX Installation and User’s Manual
3. Overview
3.1. The Bezel
The front bezel can be easily removed to access the Disk Modules. The bezel is
held on by four snap pins located at each of the four corners.
Use both hands, push from behind the left and right side of the bezel. Access
through the rack mount handles.
3.2. Disk Modules, Indicators, Controls, Connections
The disk enclosure has stand alone self-monitoring features. It monitors
temperature and fan continuously. Should the temperature exceed a safe
operating range or the fan spin below a preset minimum, the alarms will be
triggered. A red indicator light will come on plus an audible alarm will sound.
The temperature and fan audible alarm can be muted by pressing the green
Mute button. The red indicator remains on until the condition is corrected.
Power control for the PRO RX is managed by the host computer, the power
on/off switch puts the PRO RX in the standby state, when the computer turns on
the PRO RX will turn on, when the computer shuts off the PRO RX will shut off.
Disk Module
Power (white)
Activity (blue)
Key Lock
Page 11
PRO RX Installation and User’s Manual
Front view with bezel removed
Back view
Host Bus Extender Card
Config
Switches
PCI-e Port
Link Status:
Cable Installed
Power On
4 or 8 Lane Mode
Mute Button, Fan Alarm, Temp Alarm
Drive Bays
PCI-e Port
Config Switches
Management
Ethernet port Power Supply
Removable Cooling Fans
Link Status:
Cable Installed
Power On
4 or 8 Lane Mode