DJI E600 - Manual (Page 3)

©2014 DJI. All Rights Reserved. 3
Assembling the Propellers
Propeller Silver nut (1242) Black nut (1242 R)
Diagram
Assembly Location
Motor(Counter clock-wise rotation) Motor(Clock-wise rotation)
Fastening/Un-fastening
Instructions
Lock: Tighten the propeller in this direction.
Unlock: Remove the propeller in this direction.
1. Tighten the propellers by following the instructions. Propellers are self tightening during flight.
2. Keep the motor deadlocked in place and remove the propeller according to the instructions.
DO NOT use any thread locker on the threads.
Assembling the Motors
Assemble the motor to a frame arm according to the size of the assembly hole.
(1) The screw hole is M3. Assemble them with appropriate screws.
(2) Oversized screws may damage the motor.
1 mm 9
6x M3-6H
Thread depth
3mm
16
m
m
25
m
m
12mm
4x M3-6H
Thread depth 4mm
1
3
m
m