DJI S800 - Manual (Page 9)

©2012 DJI Innovations. All Rights Reserved.
9
Mount Frame Arms
Step 1 Step 2
Motor rotation direction
Clock-wise
Counter clock-wise
Motor
ESC
LED
Red
Green
Copper contacts
Cover
Screw
Propeller
(1)
800CF × 1
800FA × 6
Step 3 Step 4 Step 5
(2)
800CF × 1
800FA × 6
800CF × 1
800FA × 6
35
o
Horizontal
Vertical
Horizontal
Step1: Check arms.
(1) Make sure copper contacts are in good condition without bend or severe wear.
(2) Make sure propellers are without crack, and screws in propeller cover tight.
(3) Make sure motors are mounted firmly, and rotate freely.
(4) Distinguish LED indicator on the ESC bottom. With a red point in is red LED, others are
green LED. We recommend you mount arms with red LED to M1 and M2.
(5) Distinguish marks and on the arms.
Arm Center frame
Arm Center frame
Step2: Insert frame arm into center frame vertically.
Step3: Slowly rotate the frame arm upward until positioned completely.
Step4: Press down the buckle to lock the arm. Make sure the arm does not move.
Step5: Make sure the buckle is pressed down correctly, about 35
o
under normal circumstances.
Notices:
 Please add some lubricant at the position (1) if it is hard to press down the buckle.