Decimator Design 3G-TPG User Manual

Page 7

3G-TPG OPERATING MANUAL

www.decimator.com

6. AUDIO/Type (Parameter)
This is the type of tone for current pair.
When highlighted in the Menu Window, the Type is displayed in the Parameter Window.
Press the ENTER button to toggle through the following types:

a) Both Unbroken
b) Broken Left
c) Broken Right
d) Both Broken

TEXT: (Has SUB‐MENUs)
When highlighted in the Menu Window, press the ENTER button to enter this sub‐menu.
Press the < and > buttons to move left or right respectively through the four menus below
and press the BACK button to go back to the Main Menu when finished.

1. TEXT/Enable (Parameter)
This enables the on‐screen text generator.  Up to 20 characters can be displayed at the
bottom of the screen, inside the SAFE‐TITLE area.
When highlighted in the Menu Window, the Enable status will be displayed in the Parameter
Window.
Press the ENTER button to toggle the ON/OFF status of the on‐screen text generator.

2. TEXT/Foreground (Parameter)
This is the foreground colour of the on‐screen text.
When highlighted in the Menu Window, the Foreground is displayed in the Parameter
Window.
Press the ENTER button to toggle to through the various colours.

3. TEXT/Background (Parameter)
This is the background colour of the on‐screen text.
When highlighted in the Menu Window, the Background is displayed in the Parameter
Window.
Press the ENTER button to toggle to through the various colours.

4. TEXT/Characters (Has SUB‐MENU with parameter)
This is the 20 characters of text to display.
When selected in the Menu Window, the Characters are displayed in the Parameter
Window.
When highlighted in the Menu Window, press the ENTER button to enter this sub‐menu.
Move the cursor left or right by pressing the < or > BUTTON respectively.
Press the ENTER button to toggle the current highlighted character.
Press the BACK button to leave this SUB‐MENU.