Cyclopital3D Panasonic Z10000 Filter/Close-up Adapter - Manual (Page 2)

Features and Benefits:
•
Easily attaches without tools after first use
•
86mm lens ring allows for the attachment of close-up lenses
•
Includes 86-95mm step ring for wider coverage when using
filters & polarizers
•
Improves the camera’s image quality by replacing the plastic
lens covers on the camera with photographic quality glass-
95mm UV filter included.
• Lens shade is custom designed to fit the exact FOV of the
camera and helps to improve image contrast by keeping stay
light off the lenses
• Lens shade has a small opening on the bottom to allow for
filter rotation while still attached to the camera
•
Compatible with the Century Optics Sunshade with 4x4 pro
filter holder.
•
Includes rear lens cover and front lens cap
• Includes 86mm close-up lenses
Tips for use:
•
To attach the FCA to the camera, you must first remove the
manufacturer’s front lens bezel by removing the four small
screws on the front of the bezel with a cross-point
screwdriver.
•
The FCA has a thumb screw is for attaching the FCA to the
camera. We recommend leaving it on the camera all the time
to improve image quality.
•
Attach the FCA to camera with the word “Cyclopital3D” on
the top and tighten the “thumb-screw” by gently turning it
counter-clockwise when viewed from the top of the unit. Only
tighten it enough so the adapter doesn’t easily come off; the
screw won’t come to a “hard stop” so be careful not to over-
tighten it or it could break
• The use of 95mm lens ring for filters and polarizers is
recommended to avoid vignetting
•
86mm close-up lenses are recommended, such the Vivitar
Series 1 Close-up lens set
Warranty
Your adapter comes with a Limited Warranty against defects in workmanship and
materials for 30 days from the date of purchase. The limited warranty does not apply if the
product has been damaged by accident, mishandling, misuse, abuse, or alteration.
Care and Maintenance:
• If you drop the FCA, it will probably break. In some instances,
it can be repaired using standard super glue (cyanoacrylate),
which bonds well to the composite material used in its
construction.
All rights reserved, Cyclopital3D, Inc. 2013