ClearCube I/Port Users Guide - Manual (Page 40)

30 •
• The I8330 implements USB 1.1. Read and write performance are specified at 300KB/s
read and 200KB/s write.
• The I8330 does not support remote power on/off or reset functionality.
• The I8330 is not capable of running a VPN client locally (on the I8330 device). A VPN
connection is possible only if another device (e.g., a router) to which the I8330 is
connected includes a VPN client and can, therefore, make the VPN connection.
I94xx I/Ports
To ensure 100/full-duplex throughput between a V51xx card in a blade and an I94xx I/Port, set
any network switches connecting the blade and the I/Port to automatic negotiation. Explicitly
setting a network switch to 100/full-duplex can cause throughput issues. If there are
performance or throughput issues after setting network switches to automatic negotiation,
physically disconnect and then reconnect the network cables to the switch.