Clearaudio STATEMENT - Manual (Page 18)

Statement
User Manual
Page 18  Clearaudio electronic GmbH 2013
6. Service
If service or repair on any Clearaudio product is necessary, please contact your dealer /
distributor or contact Clearaudio directly. Clearaudio can also inform you of your nearest
service location.
Transportation advice:
If any transportation of the Statement turntable should be necessary, always please remove the
turntable platter. Otherwise serious damage can occur!
The bearing hole needs to be covered as well, to avoid any dust coming into the bearing. Always
take of the pulley of the motor unit, to prevent the motor shaft from any damage.
PLEASE RETAIN ALL ORIGINAL PACKAGING. You will need it if this unit has to be
transported and / or shipped. Any further questions you may have about this turntable should be
directed to the distributor or directly to Clearaudio at
Attention:
If the Statement is a longer time not in use, please switch the turntable on the main switch on
the motor completely off!
Clearaudio electronic GmbH
Spardorfer Str. 150
91054 Erlangen
Germany
Tel/Phone: +49 9131 40300100
Fax: +49 9131 51683
www.clearaudio.de
www.analogshop.de
[email protected]