Clearaudio STATEMENT - Manual (Page 16)

Statement
User Manual
Page 16  Clearaudio electronic GmbH 2013
4. Motor adjustment
1.
Push the motor pulley over the motor spindle and lock
in place by gently tightening the three screws in the
side of the pulley.
(If not already factory adjusted)
2.
Place the drive belt first around the lower drive
platter and then around the motor pulley.
3.
Plug the supplied Statement power supply first into the back of the motor, and finally into the
mains supply.
4.
To assembly the tonearm please refer to the instruction manual of the manufacturer.
The set-up of your Statement turntable is now complete!
Clearaudio wish you al lot of pleasure and musical enjoyment with your Statement !
Pic. 20: Setting the motor pulley
Pic. 21: Placing the drive belt
Back view