Statement – Clearaudio STATEMENT User Manual
Page 11
Statement
User Manual
Page 11
Clearaudio electronic GmbH 2013
9.
Lock the floating chassis to the pendulum shaft by fully tightening the eight screws.
IMPORTANT!
Being careful not to damage the bearing spindle
on top of the pendulum shaft, lower the main
floating chassis over the top of the pendulum shaft.
10.
Apply 3 to 4 drops of the Clearaudio Synthetic Bearing Oil (also available at
Art . No. AC068) to the bearing spindle.
Lock the 8 screws
Pic. 9: Removing the wooden spacers
Please apply 3 to 4 drops to
the bearing spindle
Pic. 10: Tighten the bearing screws