Clay Paky GLOW UP & FLIGHT CASE (F21230) PRELIMINARY - Manual (Page 20)

20 GLOW UP
365,5
(14,37")
226
(8,90")
165
(6,49")
TECHNICAL DATA
THE PROJECTOR WILL NOT SWITCH ON
TROUBLE
THE PROJECTOR WILL NOT SWITCH ON
DEFECTIVE PROJECTION
REDUCED LUMINOSITY
POSSIBLE CAUSES CHECKS AND REMEDIES
No power supply.
LED burnt out or defective.
Signal transmission cable faulty or disconnected.
Incorrect addressing.
Fault in the electronic circuits.
Optic fault.
Dust or grease deposits.
Check the power supply voltage or battery charge.
Replace LED.
Replace the cables.
Check addresses (see instructions).
Call an authorised technician.
Call an authorised technician.
Clean (see instructions).
CAUSE AND SOLUTION OF PROBLEMS
Source
4 10 W MC-E Cree leds
Led pilot power
40W
Optics
Optic zoom, manually adjustable, magnetic support
for any additional diffusers
LED color temperature
5700°C GlowUP C
6000°C GlowUP W
6200°C cool white GlowUp TW
2700°C warm white GlowUp TW
4200°C cool+warm white GlowUp TW
Head adjustment
+/-105°
Cooling
High efficiency external die-cast aluminium
Control
• Wireless DMX multimode: Master, Slave and
Reapeter
• Antenna built in the case IP65
• Master: can transmit other slaves the synchroni-
sed DMX scenes saved on it, both as macros
and as DMX recorder.
• Repeater: Receives the signal from the master
and re-transmits it to other Slaves hidden from
the master
• XLR 5-pole DMX-in DMX-out standard sockets
• Remote wireless board settings with PC
• Default macros, user programmable macros.
• DMX recorder to save scene sequences.
User interface
• LCD display 2 lines with 16 characters each,
backlit LED, white on black
• 4 membrane buttons
External power
full range 100-240V 50-60Hz, PowerCon connec-
tor, for both battery charge and normal operations
Absorbed power
50W max - 170 VA
Body
• Injection pressed ABS case (UV protected)
• Finish: Polished metallic – Painted White or
Black
• carrier handle
• 4 non-slip rubber feet
Fittings
2 fast-look holes for omega hook-up
Safety
safety chain hole and padlock hole
Weight
7.5 Kg
Protection rating
IP65
Valves
Compensation valve IP65
Battery
• Duration 10 hours full, white, 20 hours color fade
• 4-hour fast charge from flight case, 8 hours in
slow charge with PowerCon
• More than 2,000 charge/deplete cycles
• No memory effect
• No acid leaks
Working position
Works in any position
CE Marking
• In conformity with European Union Low Voltage
Directive 2006/95/CE and Electromagnetic com-
patibility directive 2004/108/CE