Clay Paky GLOW UP & FLIGHT CASE (F21230) PRELIMINARY User Manual
Page 14
14
GLOW UP
CHARGE HOURS
Permette di selezionare come visualizzare la carica della batteria sul
display in stato di riposo.
5) Premere ENTER
A
per visualizzare le ore di carica della batteria.
6) Premere SELECT
S
per tornare al Menu precedente.
DMX MONITOR
Displays the DMX input level in bit for each GlowUP channel.
1) Press ENTER
A
– the first channel appears on the display.
2) Use the
B
and DOWN
C
keys to select the channel.
3) Press ENTER
A
to display the channel DMX level (value between 0
and 255).
4) Press SELECT
S
to return to the previous Menu.
FW UPLOADER
Used to transfer software from one projector to all other connected
projectors.
1) Press ENTER
A
use the UP() e DOWN() keys to select:
Cable upload: to start the firmware upload via DMX cable.
Radio upload: to start the firmware upload via wireless
2) Press ENTER
A
to transfer firmware or SELECT
S
to return to the
previous Menu.
SETUP MODEL
Use to change/select the model to be assigned to the projector.
1) Press ENTER
A
– current settings appear on the display.
2) Use the
B
and DOWN
C
keys to select one of the following
models:
COLOR
TUNABLE WHITE
WHITE
3) Press ENTER
A
to confirm the selection (the display blinks for
several seconds) or SELECT
S
to keep the current settings and
return to the previous Menu.
CPU RESET
Used to reset the CPU. Settings will not be reset.
1) Press ENTER
A
– a confirmation message appears on the display
(OK?)
2) Press ENTER
A
to RESET or SELECT
S
to return to the previous
Menu.
TEST
Used to test the correct operations of effects.
1) Press ENTER
A
.
2) Use the
B
and DOWN
C
keys to select the Test function.
3) Press ENTER
A
to confirm the select and start the TEST or SELECT
S
to keep current settings.
RADIO SETUP
Permette di settare il modo di Trasmissione Radio tra i 2 disponibili.
1) Premere ENTER
A
, ed entrare nel sottomenu 'TX mode' premendo
nuovamente ENTER
A
.
2) Con i tasti UP
B
e DOWN
C
selezionare:
G3 - DMX (portata maggiore) oppure
G4 - DMX + RDM (portata inferiore).
3) Premere ENTER
A
per confermare oppure SELECT
S
per
mantenere l'impostazione corrente.
L'accesso al sottomenu 'RDM discovery' viene fatto nel caso di sostituzione
della scheda Radio a seguito di un'anomalia della stessa, serve per attivare
la comunicazione tra la scheda Radio e la CPU del GlowUp.
Continued
➔
ADVANCED MENU
Advanced
FW
Uploader
DMX
Monitor
Charge
Hours
Setup Model
CPU Reset
Test
Radio Setup