Calculated Industries 6130 v2.0 - Manual (Page 8)

Adjusting the Wheel
The Celcon ® polymer wheel can be ad-
justed for each user’s preference. To
adjust the wheel, take a small, flat-head
jeweler’s screwdriver and slightly ro-
tate the screw located near the wheel
tip. Rotating the screw about 1/4 to
1/3 turn should be sufficient. Rotating
the screw within those two values
should adjust the wheel between free
spinning (which is too loose) to skid-
ding (which is too tight).
Rotate to Adjust Wheel
8 – Scale Master ® II v2.0