Calculated Industries 6130 v2.0 - Manual (Page 26)

3) Press [M+] to increment the dis-
tance. When you have reached the
correct number, press
[Scale] to ad-
vance to the next digit. Press
[Mode] to move back one digit.
4) Once the desired value has been
set, press [Set] to save this value
and exit the programming mode.
Other Constant Function Keystrokes
[Rcl] [+K]
Allows you to verify the current
constant value.
[Sub] and [+K] simultaneously
Subtracts the constant value from
the displayed value.
[Reset] and [+K] simultaneously
Resets the constant value to zero.
26 – Scale Master ® II v2.0