Calculated Industries 6130 v2.0 - Manual (Page 36)

Register Values/Settings
Permanent Values/Settings
The following registers/settings will
remain in permanent storage, only
changing:
1) when the settings are revised;
2) when the unit is reset
(“All Clear”); or
3) when the batteries are changed:
Register Default Default
Setting Imperial Metric
Mode ARCH ARCH
Bell Toggle ON ON
Scale 1/32” 1:1
Height 0,000-00 00,000.00
Linear FT-IN MM
Area SQ FT SQ MM
Volume CU FT CU MM
Height FT-IN MM
Custom Scales 1:CUSxFT-IN 1:CUS x MM
36 – Scale Master ® II v2.0