Calculated Industries 8528 - Manual (Page 18)

ProjectCalc ® Plus MX User’s Guide — 16
(cont’d)
* “Tile 100” means “100 mm tile size.”
Note: Remember to round up (e.g., 2606.13 tiles means
you should purchase 2607 tiles)
**Repeats coverage area or square metres calculated
above.
Note: Tile sizes may not display in the order shown above.
Wallpaper: Rolls of
Find the number of wallpaper rolls needed for a wall
measuring 3m x 4m, or 12 square metres.
KEYSTROKE DISPLAY
o 0.
1 2 m m w 2.30 WP R oll
(round up; purchase 3 rolls)
Note: Based on wallpaper coverage of 5.23 square metres
per roll. This value can be customized (see
“Using
Custom Settings” following this section)
Wallpaper: Finding Coverage Area
How many square metres will 8 rolls of wallpaper cover?
KEYSTROKE DISPLAY
o 0.
8 w w 41.81 SQ M
There are six (6) material keys that you may use to store
new non-standard material sizes: Blocks, Bulk Bags,
Paint, Studs, Custom Tile and Wallpaper.
To store new material values (e.g., coverage per bag, or
paint coverage per litre) use the s key. Just remember
these values are permanently stored until you change
them. (Only a Ç x or storing new values will delete
these registers.)
PROJECT EXAMPLES –
USING CUSTOM SETTINGS
PRG8528E-G 10/23/09 Page 16