Calculated Industries 8528 - Manual (Page 10)

ProjectCalc ® Plus MX User’s Guide — 8
Note: These settings are PERMANENTLY STORED (will
not clear upon turning your calculator off until you
change them or reset the calculator). So be sure to
check the stored values using the
r key prior to com-
pleting new problems, and set new values if needed
using the
s key.
Default Value/Standard Sizes
3.66m, 4m, 2m and 3m-wide
carpet rolls
1 litre covers 10 square metres
Slab Sizes: 300mm x 300mm,
400mm x 400mm,
450mm x 300mm,
450mm x 450mm,
600mm x 450mm,
600mm x 600mm,
600mm x 300mm
400mm (0.4m) on-centre spacing
Tile sizes: 100mm, 150mm,
200mm, 225mm, 250mm,
300mm, 330mm, 500mm and
50mm
Grout width = 0
1 roll covers 5.23 square metres
(520mm x 10.05m)
Key
Flooring (Carpet)
*Paint
Slabs (Concrete)
*Studs
Tile
*Wallpaper
PRG8528E-G 10/23/09 Page 8