Calculated Industries 4095-C Pocket Reference Guide - Manual (Page 8)

P
ocket
R
efeRence
G
uide
— 13
Miscellaneous Functions

Open parenthesis key.

Close parenthesis key.

X
y
– Enters an exponential value
other than x 2 or Square Root.

 Exponential Root Value (X
1/y
)–
Enters an exponential root value.

 Pi – Displays value of π (3.141593).

 Reciprocal (1/x) – Finds the
reciprocal of a number
(e.g.,    0.125).

 Change Sign (+/–) – Toggle
displayed value between minus and
plus value.

 Clear All – Returns all stored
values to the default settings.
Does not affect Preference settings.

X
2
– Squares the value in the display.

√
__ _
x – Square root function.

 Cost - Cost function.
(cont'd)

 Pipe Type – Defines the Pipe Type
based on Pipe Material.

 Cutback – Calculates pipe Cutback
after Bend Angle and Offset are
entered.

 Rolling Offset (Roll) – Calculates
Rolling Offset pipe length.

 Flow – Enter or calculate
volumetric Flow Rate through a
pipe.

 Velocity – Enter or calculate
Velocity and convert between feet
per second, feet per minute, and
meters per second.

 Pressure – Enter Pressure value.
Calculate Pressure loss. Convert
between units of pressure.

 Force – Enter or calculate Force
and convert between lbf, newton.

 Area – Enter pipe area for use in
Flow, Velocity, Pressure, and Force
calculations. Calculate Area given
values for Flow/Velocity or Force/
Pressure.
(cont'd)