Using m, Using the pipe trades pro pipe material key – Calculated Industries 4095-C Pocket Reference Guide User Manual
Page 11
Using M+
KEYSTROKE
DISPLAY
M+ 355.
M
M+ 255.
M
7
(M-)
M- 745.
M
TTL – 135.
M
AVG – 45.
M
CNT 3.
M
; ;
M+ – 135.
UsinG The PiPe Trades Pro
Pipe Material Key
The Pipe Material key lets you choose a
pipe material, which defines the available
sizes and surface roughness used by the
calculator. The default material for the Pipe
Trades Pro is Steel, but you can choose from
material types as shown.
KEYSTROKE
DISPLAY
0.
(Steel)
MATL StEEL
(Stainless Steel)
MATL S.StEEL
(Brass)
MATL brASS
(Aluminum)
MATL AL.
(Cast Iron)
MATL CASt
(Plastic)
MATL PLAStIC
P
ocket
R
efeRence
G
uide
— 19
KEYSTROKE
DISPLAY
0.
(%)
229 FEET 2-3/8 INCH
Add a 10% waste allowance to 275 feet of pipe:
KEYSTROKE
DISPLAY
0.
7
302 FEET 6 INCH
memory oPeraTion
Whenever the key is pressed, the
displayed value will be added to the Memory.
Other memory functions:
FUNCTION
KEYSTROKE
Add to Memory
Subtract from Memory
Recall total in Memory
Display/Clear Memory
Clear Memory
Memory is semi-permanent, clearing only
when you:
1) turn off the calculator
2) press ;
3) press ;
4) press (Clear All)
When Memory is recalled ( ; ),
consecutive presses of will display the
calculated average and total count of the
accumulated values.
(cont'd)
(cont'd)