Calculated Industries 4095-C Pocket Reference Guide - Manual (Page 13)

elbow fittings can have a different Take-Out
calculation from the field cut variants.
This function toggles the Elbow types
between the following options:
Butt Weld – Long
Default. Use this option when utilizing
90° long radius or factory 45° long radius
B.W. elbow fittings, or any odd-angle long
radius fitting cut from a 90° B.W. elbow.
Butt Weld – Short
Use this option when utilizing 90° short
radius or factory 45° short radius fittings,
or any odd-angle short radius fitting cut in
the field from a 90° B.W. elbow.
Field Cut – Long
Use this option when utilizing long radius
B.W. elbows, or any odd-angle long
radius fitting cut from a 90° B.W. elbow,
including a 45° B.W.
Field Cut – Short
Use this option when utilizing short radius
B.W. elbows, or any odd-angle short
radius fitting cut from a 90° B.W. elbow,
including a 45° B.W.
P
ocket
R
efeRence
G
uide
— 23
(cont'd)
(cont'd)
KEYSTROKE DISPLAY

(Filled Weight/Foot) FILL SIZE 13.11634 LB PER FEET

(Internal Area) AREA SIZE 6.605199 SQ INCH
Elbow Type
The Elbow Type function lets you chose
between long or short radius, and between
factory and field cut 45º Butt Weld (B.W.)
elbow types. The default value is for long
radius, factory cut 45º B.W. elbow type.
The Elbow option setting has an impact
on the Take-Out calculations as the radii
vary between long and short Butt Weld
fittings. Additionally, factory made 45º B.W.
2593-4095 PipeSizeErrorStickers_1.75x1.75.eps