Calculated Industries 4095-B Pocket Reference Guide - Manual (Page 9)

Entry can be whole or decimal
numbers. Also used with
 for
entering fractional inch values
(e.g.,
     ).
Repeated presses during
conversions toggle between
fractional and decimal inches.

Fraction Bar – Used to enter
fractions. Fractions can be entered
as proper (1/2, 1/8, 1/16) or
improper (3/2, 9/8). If the
denominator (bottom) is not
entered, the calculator’s fractional
accuracy setting is automatically
used. Results are always shown
in typical building fractional format.
  Identifies/Converts
to
gallons per minute (GPM)
  Identifies/Converts
to
liters per second (l/s)
  Identifies/Converts
to
cubic feet per minute (CFM)
  Identifies/Converts
to
cubic feet per second (CFS)
  Identifies/Converts to ºC
  Identifies/Converts to ºF

Meters – Enters or converts to meters.