Calculated Industries 4095-B Pocket Reference Guide - Manual (Page 28)


(Material) MATL SIZE STEEL

(Weight per Foot) PIPE SIZE 10.2528
LB Per FEET

(Filled Weight/Foot) FILL SIZE 13.11634
LB Per FEET

(Internal Area) AREA SIZE 6.605199
SQ INCH
Finding Pipe Lengths
The components of rolling offset calculations
sometimes have different names in different
geographic regions and in different trades.
• Roll – the horizontal component of a rolling
offset. May also be known as “offset”.
• Offset – the vertical component of a rolling
offset. May also be known as “rise” or “set”.
• Bend – the bend angle, also known as “fitting
angle” or “angle of turn”.
Note: If an angle is not entered, or if the angle
is set to 0 degrees, the fitting angle is assumed
to be 90º.
Find the pipe Cutback when you are running
pipes through a 45º bend with a 10” offset.
KEYSTROKES DISPLAY
 
0.
  
/0 45.00 º
   
OFST 10
INCH
 
CUT 4 1/8
INCH
P
OCKET
R
EFERENCE
G
UIDE
— 29