Calculated Industries 4065 v3.1 Pocket Reference Guide Advanced Consnruction-Math - Manual (Page 37)

P OCKET R EFERENCE G UIDE — 33
DEFAULT SETTINGS
After a Clear All (Ç x), your calculator
will return to the following settings:
STORED VALUES DEFAULT VALUE
Desired Riser Height
7-1/2
INCH
Desired Tread Width
10
INCH
Floor Height
10
INCH
On-center Spacing
16
INCH
Weight per Volume
1.5
Ton Per CU YD
Block Area
128.
SQ INCH
Block Length
16
INCH
Footing Area
264.
SQ INCH
Spring (crown) Angle
45.00°
If you replace your batteries or perform a
Full Reset
* (press O, hold down x, and
press o), your calculator will return to
the following settings (in addition to those
listed above):
PREFERENCE SETTINGS DEFAULT VALUE
Fractional Resolution 1/16
Area Display Standard
Volume Display Standard
(Cont’d)