Calculated Industries 4065 v3.1 Pocket Reference Guide Advanced Consnruction-Math - Manual (Page 17)

P OCKET R EFERENCE G UIDE — 13
KEYSTROKE DISPLAY
o o 0.
Enter numeric value and press desired unit
key three times to label value as “Cubic:”
1 0 0 Ç 9 9 9
100
CU MM
Note: If you pass the desired dimensional for-
mat, keep on pressing the dimensional unit key
until the desired result is displayed again.
EXAMPLES
Adding and Subtracting Strings of
Dimensions
Add the following measurements:
• 850 mm
• 1.2 m
• 600 mm
Then subtract 175 mm.
KEYSTROKE DISPLAY
8 5 0 Ç 9 +
1 • 2 m +
6 0 0 Ç 9 = 2650.
MM
– 1 7 5 Ç 9 = 2475.
MM