Calculated Industries 4067 Pocket Reference Guide - Manual (Page 43)

41
2. Go to Materials function:
N (If necessary, continue pressing N until sTuds displays.)
3. Start Studs Function:
e
4. Enter 40' Total Wall Length:
40fe
5. Enter two Corners:
2e
6. Enter two Windows:
2e
7. Enter one Door:
1e
8. Accept 16" default value for Stud On-center Spacing:
e
9. Accept 5% default value for Waste Factor and solve for Number of Studs:
e nuMbeR of sTuds 44.