Calculated Industries 4067 Pocket Reference Guide - Manual (Page 23)

21
Extras — U.S. Mode Extras — Metric Mode
Elliptical Arch
• O.C. Spacing 16"
• Position 1 = Outside
Crown Molding
• Corner Angle 90°
• Spring Angle 45°
Elliptical Arch
• O.C. Spacing 400 mm
• Position 1 = Outside
Crown Molding
• Corner Angle 90°
• Spring Angle 45°
Spacing
• Object Width 1-1/2"
• End Position 1 = Beginning
• Mark Position 2 = On-center
Spacing
• Object Width 38 mm
• End Position 1 = Beginning
• Mark Position 2 = On-center