Bully Dog PMT 07.5-08 GM 6.6L Duramax LMM Version 1.0.1.1 - Manual (Page 5)

USED PMT: Transferring SD card Files to PMT: Make certain that the PMT was returned to stock befor transferring it to
the new vehicle.
1. With the PMT secure in the PMT cradle, insert the sd card into the side of the PMT.
2. Turn the vehicle key to the run position. (do not start the engine)
3. From the Main screen navigate to the main menu and scroll up to the “Change Vehicle,” main menu option. enter into the Change
Vehicle menu; notice that the LMM is not yet in the list. The LMM is not yet in the list because at this point the PMT does not know that it
exists. select ‘06-’07 GM 6.6L duramax LBZ to boot load the new files onto the PMT. once this vehicle type is selected the PMT will require
verification. select “Yes” to verify the selection.
4. The PMT will boot load the new vehicle files from the sd card, this is noticeable by the blinking lights. The PMT will then reset.
5. now enter into the Change vehicle screen one more time. Upon entering the Change Vehicle screen again, on the second time the
menu will also include the LMM. select: ’07.5-’08 GM 6.6L duramax LMM. Verify the selection and wait for the PMT to load the vehicle
files from the sd card.
PM
T V
er
sio
n U
Pda
Te
Go Back VEHICLES
‘06-’07 Dodge 5.9L Cummins
‘01-’05 GM 6.6L Duramax
‘06-’07 GM 6.6L Duramax
‘03-’05 Dodge 5.9L Cummins
Go Back VEHICLES
‘06-’07 Dodge 5.9L Cummins
‘01-’05 GM 6.6L Duramax
‘06-’07 GM 6.6L Duramax
07.5-‘08 GM 6.6L Duramax
BOOTING IMG
Selected:
‘06-’07 GM 6.6L Duramax LBZ
Loading file from SD card.
(PMT will reset and blink light.)
Don’t Unplug!
BOOTING IMG
Selected:
‘06-’07 GM 6.6L Duramax LBZ
Loading file from SD card.
(PMT will reset and blink light.)
Don’t Unplug!
Go Back VEHICLES
YES
no
You have selected:
‘06-’07 GM 6.6L Duramax LBZ
Are you sure this is your vehicle?
Please press YES or NO.
Go Back MAIN MENU
to Main Screen
Gauge Set Up
Set User Options
Set Defuel Levels
Change Vehicle