Bully Dog PMT 07.5-08 GM 6.6L Duramax LMM Version 1.0.1.1 - Manual (Page 2)

PM
T V
er
sio
n U
Pda
Te
Parts Installation:
refer to the PMT installation Manual to identify the parts
described below. The installation overview provides a
quick reference installation guide for the LMM. see the
install overview below. There are three general steps
that need to take place to install the PMT on the LMM
duramax to complete the installation of the parts:
1. The first step in installing the PMT and all of the parts
is determining the mounting position for the PMT. There
are two mounting positions offered for the PMT: a-pillar
Mount and dash Mount. refer to the PMT instruction
manual for mounting instructions.
2. The second step includes running the Cradle
Cable from the PMT mounting position down
to the oBd ll block, and plugging it into the
oBd ll block. see the oBd ll diagram below to
see the location of the oBd ll port and how the
Cradle Cable plugs into the oBd ll block. For in-
depth instructions refer to the PMT installation
manual.
3. running the Power Wire through the fire wall and
into the fuse box. Find a rubber grommet in the fire
wall that can be loosened so that the Power Wire can be
ran through the fire wall and into the engine bay. Then
remove the Fuse box lid from inside the engine bay. The
power wire needs to be tapped into fuse #42. Use the
fuse tap included with the parts in the PMT packaging.
see the fuse diagram to help identify the fuse location
within the fuse box.
OBDII P
ort
OBDII A
dapter
Plug
Cradle C
able
Fire w
all grommet
fuse b
ox
PMT & Cradle
Power Wire
‘07.5-’08 GM 6.6L Duramax LMM Installation Overview
‘07.5-’08 GM 6.6L Duramax LMM OBD ll diagram
LMM Fuse diagram, connect power to Fuse #42