Bully Dog 82224 Rapid Flow - Manual (Page 7)

8
rAPid FlOW inSTAllATiOn
rapid Flow exhaust # 82224
2. Hang each of the hangers. Hangers A & B will serve dual
purposes, acting as both hangers and clamps. Hanger A
will hold the front of the muffler and Hanger B will hold
the rear of the muffler.
3. Hanger C will hold the Passenger Tail Pipe Tip and Hanger
D will hold the Driver Tail Pipe Tip.
4. Before hanging Hanger D you will need first at-
tached the Hanger Bracket onto the Frame. No
drilling is necessary as there is already a hole
in the frame at the correct location. Shown is
Hanger D which is directly across the frame from
Hanger C.
Hang the Hangers
Hanger A
Install Hanger B
Install Hanger D
Hanger B
Hanger B
Hanger D