Bully Dog 82401 Rapid Flow - Manual (Page 7)

6
rAPid FlOW inSTAllATiOn
rapid Flow exhaust # 82401
2. Install all the hangers.
3. Hang the Muffler from Hangers A & B.
4. Install the Front Piece Tail Pipe by sliding
it into the Muffler and tightening Hanger
B to hold it in place. Ensure that the bend
of the pipe is directly over the axle. At
this point don’t tighten down Hanger B
completely, instead wait until the entire
exhaust is installed before tightening ev-
erything down completely.
Hang the Hangers
Hanger B
Hanger A
Install Front Piece Tail Pipe
Front Piece Tail Pipe
Hanger C
Install Muffler
Hanger A