Bully Dog 82401 Rapid Flow - Manual (Page 6)

5
rAPid FlOW inSTAllATiOn
rapid Flow exhaust # 82401
Catalytic
Converter
(Stock)
Muffler
Tail Pipe Tip
Straight Pipes
Front Piece Tail
Pipe
QUICk OVERVIEw FULL EXHAUST
CLAMP AND HANGER PLACEMENT
Hanger B
Hanger C
Hanger A
Clamp
In these steps you will install the rapid Flow Exhaust System.
1. It is suggested that before installing the system on the truck, the Rapid Flow Exhaust System be laid out on a
large flat surface to acknowledge the location of each piece
tool s needed:
Silicone Spray Lubricant •
9/16” Wrench •
7/16” Deep Socket •
Socket Wrench •
tape measure •
INSTALLATION OF THE BULLy DOG RAPID FLOw EXHAUST SySTEM