Bully Dog 82410 Rapid Flow - Manual (Page 8)

9
rAPid FlOW inSTAllATiOn
rapid Flow exhaust # 82410
5. Hang the Muffler from Hangers B & C.
6. Install the Front Piece Tail Pipe by sliding
it into the Muffler and tightening Hanger
C to hold it in place. Ensure that the bend
of the Front Piece Tail Pipe is directly
over the axle. At this point don’t tighten
down Hanger C completely, instead wait
until the entire exhaust is installed before
tightening everything down completely.
7. Install the Tail Pipe Tip by sliding it into
the Front Piece Tail Pipe and hanging it
from Hanger D. Secure with a clamp.
Install Front Piece Tail Pipe
Install Muffler
Install Tail Pipe Tip
Tail Pipe Tip
Front Piece Tail Pipe
Hanger D
Hanger B
Hanger D
Front Piece Tail Pipe
SwITCH DIRECTIONS: THE NEXT STEPS wILL BE FROM THE BACk OF THE TRUCk