Bully Dog 83411 Rapid Flow - Manual (Page 6)

7
rAPid FlOW inSTAllATiOn
rapid Flow exhaust # 83411
CLAMP AND HANGAR PLACEMENT
Clamps
Clamps
Hanger A
Hanger B
Hanger C Hanger D
QUICk OVERVIEw FULL EXHAUST
Cross Member
Muffler
Front Piece Tail Pipe
Tail Pipe
Adapter 4”-5”
Adapter 3.5”-4”
Catalytic Con-
verter (Stock)
In these steps you will install the rapid Flow Exhaust System.
1. It is suggested that before installing the system on the truck, the Rapid Flow Exhaust System be laid out on a
large flat surface to acknowledge the location of each piece
tool s needed:
Silicone Spray Lubricant •
9/16” Wrench •
Socket Wrench •
tape measure •
INSTALLATION OF THE BULLy DOG RAPID FLOw EXHAUST SySTEM