Bully Dog 83411 Rapid Flow - Manual (Page 5)

6
rAPid FlOW inSTAllATiOn
rapid Flow exhaust # 83411
In these steps you will remove the stock
exhaust system.
1. Use a sawzall to cut
the exhaust immediately
behind the muffler.
2. Use a sawzall to cut the exhaust in back
of the Catalytic Converter and in front of
the band clamp.
4. To make removing the
Hangers an easier process,
it is recommended that you
use a silicone spray lubricant
to spray each of the rubber
hangers holding the stock exhaust.
5. Remove each piece of the stock exhaust
system, including the stock exhaust hangers.
Cut Exhaust after muffler
Cut Exhaust after catalytic converter
Remove all the necessary exhaust hangers
Important: It is illegal in all 50 states and Canada to remove the catalytic converter. Catalytic Converters must be
reinstalled in accordance with Federal Law.
REMOVAL OF STOCk EXHAUST SySTEM