beautypg.com

Intake installation – Bully Dog 51105 Rapid Flow Induction (RFI) Cold Air Intake User Manual

Page 13

background image

12

Intake Installation

3. Swap OEM MAF sensor or temperature sensor to Bully Dog tube. Remove the supplied
grommet from the Bully Dog from tube if installing the OEM MAF sensor.

4. The OEM Temperature Sensor will simply push into the supplied grommet of the intake
tube. Use supplied screws to tighten OEM MAF Sensor into place.
DO NOT USE THE STOCK SCREWS

Configuration for Temperature sensor

plug on the 05 models

Configuration for MAF sensor plug

found on 03,04,06,& 07 models