Bully Dog 53108 Rapid Flow Induction (RFI) Cold Air Intake - Manual (Page 3)

3 4
RFI COLD AIR INTAKE RFI COLD AIR INTAKE
Black Oxide Pan Head
Screws
Bully Dog provides screws
to secure the MAF sensor to
the air intake tube.
T20 Security Torx® Bit
The mass air flow sensor is
attached to the stock intake
tube using tamper resistant
pin-in-Torx® screws. Bully
Dog includes a Torx® bit for
convenience. If the bit is lost it can be purchased at any auto
parts store.
Nylon Washer
These nylon washers protect
the mass airflow sensor and
prevent it from being bent
when it is attached to the air
intake tube.
MAF Replacement O-Ring
Meant to replace the
orange O-Ring beneath the
stock MAF sensor, this ring
ensures a tight seal between
the MAF sensor and the
Bully Dog intake tube.
Stage 2 Air Intake Tube
Designed to fit in your
engine bay, the stage 2 air
intake tube improves air flow
into the turbo through the
smoothest curves possible
to prevent any loss of power
and provide sleek style
under the hood.
Silicone Coupler
These high quality 3-ply
couplers are durable, flexible
and strong.
Band Clamps
Adjustable clamps connect
and hold all tubing in place.
Air Filter & Band Clamp
The Rapid Flow Induction
Cold Air Intake system
includes an ISO 5011
certified eight-layer oil filter.
The air filter is housed within
the intake enclosure and
secured onto the end of
the air intake tube using the
included filter clamp and a flat-head screwdriver.