Bully Dog 182062 Dodge 5.9L Cummins 2500-3500 04.5-07 - Manual (Page 9)

rAPid FlOW inSTAllATiOn
8
7. At this point it is time to install the Straight
Pipe. Measure and cut the Straight Pipe for
the final fit, leave 3” on both sides for over-
lap.
8. Once the entire exhaust system is in-
stalled, inspect the system to ensure that
no part of the exhaust is in direct contact
with the chassis or body; adjustments
may be necessary.
9. Return to each of the Clamps and tighten
with a 9/16” wrench. Do not over tighten
the Clamps.
10. Stainless Steel Tips are available from Bully
Dog to give your truck that polished, classy
look.
Measure for Straight Pipe
Straight Pipe Installation
Adapter
Clamps
Catalytic Converter
Straight Pipe
Complete System Installed