Blizzard Lighting Kontrol 6(Rev. A) User Manual

Page 11

KONTROL 6 Manual Rev B.

Page 11

read FULL.

11. Hold for 3 seconds to exit programming mode. The

LED indicator above the button will extinguish.

3.4.3 Deleting a Chase Step

1. Enter programming mode as described in Section 3.2.1.

2. Using the button, select the chase you wish to modify.

3. Press the button. The LED indicator will illuminate

and the current step will display on the LED display. If there are no

steps in the chase, the display will read ST00.

4. Use the buttons to select the step to delete.

5. Press the button. All LEDs will blink 3 times, indicat-

ing the delete has succeeded. The steps following the deleted step

will move up one step, and the chase will be one step shorter. If the

last step is deleted, the previous step will be displayed. If there are

no steps to delete, the LED display will read NULL.

6. Repeat steps 2-5 to delete additional steps as desired.

7. Hold for 3 seconds to exit programming mode. The

LED indicator above the button will extinguish.

3.5 Playback

The KONTROL 6 features three different playback modes: Manual Control

Mode, Scene/Color/Scene Preset Mode, and Chase Mode. Additionally, the

user may trigger step changes in chase mode in one of three ways: Auto-

matically (Auto Chase Mode), Via audio signal detection (Music Chase Mode),

or Manually (Manual Chase Mode). We’ll look at all the options now.

3.5.1 Manual Control Mode

Allows the user to create a precise static color using KONTROL 6’s six control

faders.

1. Ensure that BLACKOUT mode is not selected, IE that the LED indica-

tor above the button is not lit.

2. Using the button(s), select the fixtures to

be controlled.

3. Adjust the color output using as desired.

3.5.2 Color/Scene Preset Mode

Allows the user to display one of up to 18 previously programmed color pre-

set.

1. Ensure that BLACKOUT mode is not selected, IE that the LED indica-

tor above the button is not lit.

2. Select the desired scene page using .

3. Select the desired scene/color preset using .

3.5.3 Chase Playback Mode

Allows the user to display one or more of up to 18 previously programmed

chases in sequence.