Blizzard Lighting Micro SwitchBlade - Manual (Page 14)

Page 14
SwitchBlade™ Micro User Manual Rev. A (c) Copyright 2014 Blizzard Lighting, LLC
DMX Mode
Allows the unit to be controlled by any universal DMX controller.
Set the Starting DMX Address:
The default mode for the fixture is DMX, so the first menu item that you can edit is the
starting DMX address.
1.) Navigate the menu using the
2.) Push the button.
3.) Use the buttons to select a DMX channel from 001-512.
4.) Press the button to confirm.
Select the DMX Channel Mode:
1.) Navigate the menu using the
2.) Push the button.
3.) Use the buttons to select either CH11 or 13CH mode.
4.) Press the button to confirm.
Auto, Stand-Alone, & Built-in Program Modes:
Allows a single or Master/Slaved units to run factory installed programs at user selectable speeds.
Auto Mode:
1.) Navigate the menu using the
2.) Push the button.
3.) Use the buttons to select either Au01 (fast) or Au02 (slow).
4.) Press the button to confirm.
Sound Active Mode:
1.) Navigate the menu using the
2.) Push the button.
3.) Use the buttons to select either So.on (On) or So.of (Off).
4.) Press the button to confirm.
Manual Adjustments:
1.) Navigate the menu using the
2.) Navigate the submenu using the buttons until you reach H--- (Pan), Y---
(Tilt), r--- (Red). 9--- (Green), b--- (Blue), or u--- (White) then hit .
3.) Using the buttons, select your desired value for each between
x000-x255, then hit to confirm.
Reverse Pan
1.) Navigate the menu using the
2.) Push the button.
3.) Use the buttons to select either rPoF (Off) or rPon (On).
4.) Press the button to confirm.
Reverse Tilt
1.) Navigate the menu using the
2.) Push the button.
3.) Use the buttons to select either rtoF (Off) or rton (On).
4.) Press the button to confirm.
Reverse (Flip) the Menu Display
1.) Navigate the menu using the
2.) Push the button.
3.) Use the buttons to select either rdoF (No) or rdon (Yes).
4.) Press the button to confirm.