Page 10 – Blizzard Lighting Micro SwitchBlade User Manual

Page 10

Page 10

SwitchBlade™ Micro User Manual Rev. A

USING THIS FIXTURE WITH THE wiCICLE® WIRELESS

DMX SYSTEM

In addition to the unbridled thrill you already

received the first time you plugged in your

fixture, you’ll be delighted to know that

This fixture also works seamlessly with our

wiCICLE

Wireless DMX system, without additional power.

• ONLY fixtures bearing this logo are certified for use with the wiCICLE

without external power.

• Unauthorized modification and/or using the wiCICLE

with un-

approved fixtures may cause damage to the wiCICLE

or fixture.

UNDER NO CIRCUMSTANCES IS BLIZZARD LIGHTING RESPONSI-

BLE FOR ANY DAMAGE FROM SUCH OPERATION.

• Fixtures bearing the above logo MUST only use cable and connectors

which separate chassis/case ground from cable shielding. Cabling with

the shield connected to the connector’s case/chassis may cause malfunc-

tion and damage to the wiCICLE

or fixture.

• wiCICLE

transmitters have additional power requirements and

therefore cannot be powered directly from the fixture. You will

need to utilize the supplied AC/DC adaptor to drive wiCICLE

transmitters in your system.

WE HAD THIS SPACE, SO WE FIGURED WE’D DRAW

YOU A PICTURE:

Antenna Housing & 1/2-wave

Antenna

Antenna ferrule & articulation

joint

Stainless Steel Housing

Recessed Selector Button
Status LED

3-Pin XLR Connector

(Male on transmitter, Female

on receiver model)