Blizzard Lighting RokPix (Rev A) - Manual (Page 4)

Page 4
R
okPix Manual R
ev
. A
© 2013 Blizzard Lighting, LL
C
SAFETY INSTRUCTIONS
• Please k
eep this User Guide for future use. If y
ou sell the unit to someone
else, be sure that they also receiv
e this User Guide.
• AL
W
A
YS mak
e sure that y
ou are connecting to the proper v
oltage, and that
the line v
oltage y
ou are connecting to is not higher than that stated on the de-
cal or rear panel of the
fi xture.
• This product is intended for indoor use only
.
• T
o prev
ent risk of
fi
re or shock, do not expose
fi
xture to r
ain or moisture.
• Mak
e sure there are no
fl
ammable materials close to the unit while oper
ating.
• The unit must be installed in a location with adequate v
entilation, at least
20in (50cm) from adjacent surfaces. Be sure that no v
entilation slots are
block
ed.
• AL
W
A
YS disconnect from the power source before servicing or replacing fuse
and be sure to replace with same fuse siz
e and type.
• AL
W
A
YS secure
fi
xture using a safety chain. NEVER carry the
fi
xture by its
cord. Use its carrying handles. • DO NO
T oper
ate at ambient temper
atures higher than 104°F (40°C).
• In the ev
ent of a serious oper
ating problem, stop using the unit immediately
.
NEVER try to repair the unit by y
ourself
. R
epairs carried out by unskilled people
can lead to damage or malfunction. Please contact the nearest authoriz
ed tech-
nical assistance center
. Alw
ays use the same type spare parts.
• NEVER connect the device to a dimmer pack. • Mak
e sure the power cord is nev
er crimped or damaged.
• Nev
er disconnect the power cord by pulling or tugging on the cord.
• A
void direct ey
e exposure to the light source while it is on.
Caution!
There are no user serviceable parts inside the unit. Do not
open the housing or attempt an
y repairs y
ourself
. In the unlik
ely ev
ent
your unit ma
y require service, please contact Blizzard Lighting at sup-
[email protected].
Page 17
R
okPix Manual R
ev
. A
© 2013 Blizzard Lighting, LL
C
Tech Specs!
Weight & Dimensions Length
9.22 inches (234 mm)
Width
6.5 inches (165 mm)
Height
8.98 inches (228 mm)
W
eight
9.04 lbs (4.1 kg)
Power Oper
ating V
oltage
120V
AC 60Hz
Power Consumption
165W Max, 1.43A
Light Source LED
19x 10W 4-in-1 LEDs 100,000 hours.
Optical Beam Angle
25 degree optics standard 26 degree beam 30 degree
fi eld
Luminous Intensity
1
m
2
m
R
ed
7,660 Lux
2,350 Lux
Green
7,850 Lux
2,360 Lux
Blue
8,200 Lux
2,500 Lux
White
9,230 Lux
2,500 Lux
All
23,000 Lux
2,740 Lux
Thermal Max. Oper
ating T
emp
.
104 degrees F (40 degrees C) ambient
Control Protocol
USIT
T DMX
-512
DMX Channels
8/16/72
Input
3-pin XLR Male
Output
3-pin XLR F
emale
Other Oper
ating Modes
Standalone, Master/Sla
ve, Sound Activ
e, Color Preset
Coolness Factor Lev
enty Billion P
ercent
Warranty
2-
year limited w
arr
anty
, does not co
ver malfunction caused
by damage to LED’
s.
DISCLAIMER: The power connector
fi
tted to the
fi xture
and
fi
xture cord are designed for compatibility with
products manufactured by Neutrik AG, Neutrik US
A and their related entities, howev
er they are
not manufactured by
, af
fi
liated with or endorsed by Neutrik AG, Neutrik US
A, or an
y related
entity
. Neutrik® and powerCON® are registered tr
ademarks of Neutrik AG.